Winter is a great for clear skies, less traffic, and extreme scenery. It also comes with bone numbing cold, too.
Let’s take a look at some measures to manage the cold while riding in Japan.
Basic Necessities
Prep + windproof, waterproof, and insulating are a good place to start. Keep the cold out and heat in. To that end, wearing gear that seals out the elements is essential. Unlike warmer months, you can’t afford to haphazardly slap together your favorite and/or fashionable gear as you’re dashing out the door.
- Check the weather for temperature and precipitation.
- Have an idea of your route and whether it’s likely to have ice, snow, or maybe even be closed for the season.
- Have your layers of clothing sorted.
- Pinlock or some kind of anti-fog visor solution.
- Have back-up warmth and survival solutions.
- Have your bike ready to support you in your battle against the winter elements.
- Something to keep your head warm when not wearing your helmet.
Survival Warmth – a quick Heating Hack
First things first. Let’s not die or return frostbitten from cold. While cold can be good at keeping you alert, it can also do a great disservice if hand and foot reaction time is retarded by poor blood flow and nerve overload, not to mention painful. Best initial counter-measure is chemical hotpacks. Cheap, even cheaper in bulk, they’re available in almost every convenience store and home centre, they provide great mellow warmth that can be strategically placed wherever you’re susceptible to cold. I’ve even seen these used to counter completely inadequate but stylish bike-wear choices. Don’t do that. Why? Whenever you stop or go into a heated area, you’re going to overheat, sweat and not look cool when people are actually looking at you. Like a thawing steak!
So, where do these hotpacks go? First, get the sticky-backed ones so that you can put them in odd spots. From experience, I’ve found the highlighted red areas in the pics below best.

CAUTION:
1. Do Not apply them directly to your skin, unless you’re an old leathery crocodile or want to have heat welts.
2. Do not place place them on areas sensitive to heat, like the crotch, inner wrists, inner thighs, neck, head, tummy, or central chest. I don’t need to say face, right?
3. Do not apply them in high friction areas. They contain Iron powder that clumps as they do their thing and become hard and crunchy which will cause friction and feel uncomfortable. They also contain salt to rub into a friction wound and activated charcoal which will disperse as fine powder and rub into everything you’re wearing if they do get torn apart. Ask me how I know!
4. Use the shoe specific ones for shoes and put them above your toes, not under, as they survive better there and have a better pocket of air to live on and heat.
5. Apply to muscly areas rather than fatty areas which allows better heat transfer, faster circulation, and less risk of surface overheating.
6. They gotta breathe, so if you notice them losing effectiveness, give them some air or relocate them to an area where they have a pocket of air to work with.

Best think of them more as temperature maintenance for areas or pockets of insulated mass. They do very well when paired with thick insulating layers and armour to help disperse their warmth. If it’s heat sensitive armour, the hotpacks will help keep them supple in the cold reducing discomfort, too.
As a rule, I stick them two layers away form the body if the sticky side is toward the body or three layers out if facing the body.
Applying them to the inside of a laminated outer shell tends to dramatically reduce their effectiveness, too.
From experience, applying them to the inside of a mid-layer or outer-mid-layer that can be removed at stops eliminates overheating on breaks. I typically wear an ultralight down jacket under my riding jacket and the upper-body hotpacks are stuck to that. At breaks indoors, it hangs over the back of the chair I’m sitting at as soon as I’ve completely dethawed.
For the lower body, they go at the base of my knee armour and sometimes on the outer thighs. If really cold or doing long highway hauls, the toe hotpacks get stuck to the upper inside of the toe area of the boot away from the shifter pad.
For gloves, in the cuff works if they go under the jacket. Under the back of the hand can work but can be sensitive if there for long periods. A great secondary solution is on the upper side of the wrist, stuck to the inside of the jacket. The idea here is just to keep warm blood flowing to the hands and counter the cold creep from the fingertips coming in. Actually, if the body senses extreme cold, it can pull blood/heat from the extremities which only makes things much worse. So, you want to keep the body thinking that the core is warm and that no cold is creeping up the extremities to maintain vital warming blood flow.
Layering
Modern clothing is a double edged sword for riding in winter. There’s plenty of great insulating wear, but will it allow your skin to breathe, provide flexibility, not be bulky to the point of restricting blood flow, and not stink?
The common long held logic goes something like this:
1. Base layer that allows sweat to evaporate through it yet holds a barrier of relatively stagnant air that heats up and maintains skin temperature.
2. Mid layer that works as a barrier from the outer cold and container of inner warmth while still breathing enough to let humid air pass through to the outer layer reducing condensation cooling near the skin.
3. Outer layer that keeps out the winter nastiness. Wind and precipitation are the primary concern but heatsoak shouldn’t be ignored. It must also breath too, to prevent condensation and this is where Goretex and similar outer shells shine.
In between those essential three layers, more can be added to assist by thickening the barriers and managing particular areas. For example, neck-shoulder gaiters that take the basic neck gaiter to new levels by extending over the shoulders and down across the chest, typically sitting over the mid-layer, it adds extra insulation to wind exposed shoulders and helps better seal the open collar of the jacket to neck.
Similarly, over the knee underwear can be warn over full length leggings as an extra barrier and provide a layer for a pocket of air and mounting surface for hotpacks. The silky type actually helps maneuverability.
As to odour, merino and cashmere are renowned for antibacterial properties and thermal insulation. Personally, I’ve had sucess with Uniqlo’s cashmere blend full length underwear which I began wearing last winter. In very cold conditions, an additional layer or Heattech Extra or Ultra Warm worked well over the cashmere blend base layer.
Electrical Heat

Heated gloves and liners are awesome solutions. With on or off and adjustability in between, you can dial in however much or little heat you need. There are stand alone gloves with battery packs in them and then the option to wire power in from the bike. Heated glove liners are also an option.
Then there’s heated layers from base to mid to outer for the upper body and base or mid for lower and feet.
Personally, Warm & Safe heat layer shirt over a cashmere long sleeve turtleneck base layer connected to their heated gloves with a wireless controller for the upper body is great.
Why not for the lower body? In my case, I’m yet to get too cold down there…yet. And this combo, along with layering and stick-on hotpacks, has helped me survive some seriously cold riding and been durable and reliable while doing it.
* SAFETY: Even with electric heat, hotpacks are always in my bag throughout winter, incase the bike can’t provide power.
Heated grips come in numerous shapes and prices these days and should be standard equipment on any bike sold in cold climates, in my opinion. Being able to wear summer gloves into cool evenings and and three season gloves into winter is really convenient. But, their real worth comes in the depths of winter. If you have handguards, they may be all you need. I don’t so use them with the heated gloves. Very rarely does cold turn my hands to frozen claws with that combo on full blast.
In addition to above, there are head socks and of course the miriad of socks to keep both ends warm enough. Then there’s the importance of machine operation and the vital ability to be able to see. I’ve tried all sorts of stuff from slimy to stinky to keep the visor clear and Pinlock is the winter solution for me. The other stuff isn’t even close.
Finally, is a good thermos and hot fluids for when you stop to marvel at winter’s wonderous landscapes.
I hope these tips help you get out there and ride through what I think is an awesome season to ride!

